A
-
Absorption
Mechanism and Rates of Hydrogen Cyanide Production in Polyacrylonitrile Incineration Furnaces and Suggesting a Suitable Method for the Removal of Cyanide Gas [Volume 7, Issue 2, 2014, Pages 61-75]
-
Air core
Design, Numerical Simulation and Experiment of a Swirl Injector with Tangential Inlets [Volume 7, Issue 2, 2014, Pages 97-110]
-
Alternative fuels
Exergic Comparison of SI Engines Performance for Gasoline, Methane and Hydrogen Fuels [Volume 7, Issue 1, 2014, Pages 89-105]
-
Aluminum rotary furnace
Improving the Performance of an Aluminum Rotary Furnace using Numerical Simulation [Volume 7, Issue 2, 2014, Pages 1-15]
-
Ammonium Perchlorate
Effect of MgONanoparticle on Thermal Decomposition of Ammonium Perchlorate [Volume 7, Issue 2, 2014, Pages 49-59]
-
Artificial Neural Network
Large Eddy Simulation of the Premixed Flame-Turbulence Interactions using Artificial Neural Network in Chemical Kinetics Tabulation [Volume 7, Issue 1, 2014, Pages 35-53]
B
-
Blowout
Numerical Study of Propane-Air Combustion Stability in a Diverging Microburner [Volume 7, Issue 2, 2014, Pages 17-30]
C
-
CFD
Improving the Performance of an Aluminum Rotary Furnace using Numerical Simulation [Volume 7, Issue 2, 2014, Pages 1-15]
-
Chemical Kinetic Model
Chemical Kinetic Modeling of the Selective Non Catalytic Reduction of NOX by the Method of Reduced Mechanism using Ammonia and Urea as Reagents [Volume 7, Issue 1, 2014, Pages 73-87]
-
Combustion
Optimization of Genetic Algorithm Parameters for Determination of Kinetic Model Coefficients of Methane/Air Combustion [Volume 7, Issue 1, 2014, Pages 1-16]
-
Combustion
Study of Equivalence Ratio and Propellant Effects on a Reactive Flow with Low Residence Time and Highly Variable Tempereture and Pressure [Volume 7, Issue 2, 2014, Pages 77-95]
-
Computational Fluid Dynamics
Study of Equivalence Ratio and Propellant Effects on a Reactive Flow with Low Residence Time and Highly Variable Tempereture and Pressure [Volume 7, Issue 2, 2014, Pages 77-95]
D
-
Desulfurization
Structural Modification of NiMo/Al2O3 Nanocatalyst by Phosphor via Impregnation Method Used in Desulfurization of Thiophene [Volume 7, Issue 1, 2014, Pages 55-71]
-
Dual fuel engine
Parametric Study on the Effect of Increasing the Amount of Diesel Fuel in Dual Fuel Engines at Part Load Conditions [Volume 7, Issue 1, 2014, Pages 17-34]
E
-
Effect of increasing the amount of diesel fuel
Parametric Study on the Effect of Increasing the Amount of Diesel Fuel in Dual Fuel Engines at Part Load Conditions [Volume 7, Issue 1, 2014, Pages 17-34]
-
Equivalence ratio
Study of Equivalence Ratio and Propellant Effects on a Reactive Flow with Low Residence Time and Highly Variable Tempereture and Pressure [Volume 7, Issue 2, 2014, Pages 77-95]
-
Exergy analysis
Exergic Comparison of SI Engines Performance for Gasoline, Methane and Hydrogen Fuels [Volume 7, Issue 1, 2014, Pages 89-105]
-
Exhaust Gas Temperature Prediction
Using a Multi Zone Thermodynamic Model in an HCCI Engine to Predict Exhaust Gas Temperature [Volume 7, Issue 2, 2014, Pages 31-47]
-
Extinction
Numerical Study of Propane-Air Combustion Stability in a Diverging Microburner [Volume 7, Issue 2, 2014, Pages 17-30]
F
-
Forced Convection
Improving the Performance of an Aluminum Rotary Furnace using Numerical Simulation [Volume 7, Issue 2, 2014, Pages 1-15]
-
Furnace
Mechanism and Rates of Hydrogen Cyanide Production in Polyacrylonitrile Incineration Furnaces and Suggesting a Suitable Method for the Removal of Cyanide Gas [Volume 7, Issue 2, 2014, Pages 61-75]
G
-
Genetic algorithm
Optimization of Genetic Algorithm Parameters for Determination of Kinetic Model Coefficients of Methane/Air Combustion [Volume 7, Issue 1, 2014, Pages 1-16]
H
-
HCCI Engine
Using a Multi Zone Thermodynamic Model in an HCCI Engine to Predict Exhaust Gas Temperature [Volume 7, Issue 2, 2014, Pages 31-47]
-
Heat loss coefficient
Numerical Study of Propane-Air Combustion Stability in a Diverging Microburner [Volume 7, Issue 2, 2014, Pages 17-30]
-
Hydrogen Cyanide
Mechanism and Rates of Hydrogen Cyanide Production in Polyacrylonitrile Incineration Furnaces and Suggesting a Suitable Method for the Removal of Cyanide Gas [Volume 7, Issue 2, 2014, Pages 61-75]
I
-
Injector design
Design, Numerical Simulation and Experiment of a Swirl Injector with Tangential Inlets [Volume 7, Issue 2, 2014, Pages 97-110]
-
Internal combustion engine
Exergic Comparison of SI Engines Performance for Gasoline, Methane and Hydrogen Fuels [Volume 7, Issue 1, 2014, Pages 89-105]
K
-
KIVA-3V code
Parametric Study on the Effect of Increasing the Amount of Diesel Fuel in Dual Fuel Engines at Part Load Conditions [Volume 7, Issue 1, 2014, Pages 17-34]
L
-
Large eddy simulation (LES)
Large Eddy Simulation of the Premixed Flame-Turbulence Interactions using Artificial Neural Network in Chemical Kinetics Tabulation [Volume 7, Issue 1, 2014, Pages 35-53]
M
-
MgONanoparticles
Effect of MgONanoparticle on Thermal Decomposition of Ammonium Perchlorate [Volume 7, Issue 2, 2014, Pages 49-59]
-
Microburner
Numerical Study of Propane-Air Combustion Stability in a Diverging Microburner [Volume 7, Issue 2, 2014, Pages 17-30]
-
Modeling
Improving the Performance of an Aluminum Rotary Furnace using Numerical Simulation [Volume 7, Issue 2, 2014, Pages 1-15]
-
Multi-zones modeling
Exergic Comparison of SI Engines Performance for Gasoline, Methane and Hydrogen Fuels [Volume 7, Issue 1, 2014, Pages 89-105]
-
Multi-zone Thermo-kinetic model
Using a Multi Zone Thermodynamic Model in an HCCI Engine to Predict Exhaust Gas Temperature [Volume 7, Issue 2, 2014, Pages 31-47]
N
-
NiMo/Al2O3
Structural Modification of NiMo/Al2O3 Nanocatalyst by Phosphor via Impregnation Method Used in Desulfurization of Thiophene [Volume 7, Issue 1, 2014, Pages 55-71]
-
NOx
Chemical Kinetic Modeling of the Selective Non Catalytic Reduction of NOX by the Method of Reduced Mechanism using Ammonia and Urea as Reagents [Volume 7, Issue 1, 2014, Pages 73-87]
O
-
Optimized kinetic model
Optimization of Genetic Algorithm Parameters for Determination of Kinetic Model Coefficients of Methane/Air Combustion [Volume 7, Issue 1, 2014, Pages 1-16]
P
-
Part loads
Parametric Study on the Effect of Increasing the Amount of Diesel Fuel in Dual Fuel Engines at Part Load Conditions [Volume 7, Issue 1, 2014, Pages 17-34]
-
Perfectly-stirred reactor
Optimization of Genetic Algorithm Parameters for Determination of Kinetic Model Coefficients of Methane/Air Combustion [Volume 7, Issue 1, 2014, Pages 1-16]
-
Phosphor
Structural Modification of NiMo/Al2O3 Nanocatalyst by Phosphor via Impregnation Method Used in Desulfurization of Thiophene [Volume 7, Issue 1, 2014, Pages 55-71]
-
Polyacrylonitrile
Mechanism and Rates of Hydrogen Cyanide Production in Polyacrylonitrile Incineration Furnaces and Suggesting a Suitable Method for the Removal of Cyanide Gas [Volume 7, Issue 2, 2014, Pages 61-75]
-
Premixed flame
Large Eddy Simulation of the Premixed Flame-Turbulence Interactions using Artificial Neural Network in Chemical Kinetics Tabulation [Volume 7, Issue 1, 2014, Pages 35-53]
-
Premixed flame
Optimization of Genetic Algorithm Parameters for Determination of Kinetic Model Coefficients of Methane/Air Combustion [Volume 7, Issue 1, 2014, Pages 1-16]
-
Promoter
Structural Modification of NiMo/Al2O3 Nanocatalyst by Phosphor via Impregnation Method Used in Desulfurization of Thiophene [Volume 7, Issue 1, 2014, Pages 55-71]
R
-
Radiation
Improving the Performance of an Aluminum Rotary Furnace using Numerical Simulation [Volume 7, Issue 2, 2014, Pages 1-15]
-
Reduced Mechanism
Chemical Kinetic Modeling of the Selective Non Catalytic Reduction of NOX by the Method of Reduced Mechanism using Ammonia and Urea as Reagents [Volume 7, Issue 1, 2014, Pages 73-87]
S
-
Selective Non Catalytic Reduction
Chemical Kinetic Modeling of the Selective Non Catalytic Reduction of NOX by the Method of Reduced Mechanism using Ammonia and Urea as Reagents [Volume 7, Issue 1, 2014, Pages 73-87]
-
Structural properties
Structural Modification of NiMo/Al2O3 Nanocatalyst by Phosphor via Impregnation Method Used in Desulfurization of Thiophene [Volume 7, Issue 1, 2014, Pages 55-71]
-
Swirl injector
Design, Numerical Simulation and Experiment of a Swirl Injector with Tangential Inlets [Volume 7, Issue 2, 2014, Pages 97-110]
T
-
Thermal analysis
Effect of MgONanoparticle on Thermal Decomposition of Ammonium Perchlorate [Volume 7, Issue 2, 2014, Pages 49-59]
-
Thermal decomposition
Effect of MgONanoparticle on Thermal Decomposition of Ammonium Perchlorate [Volume 7, Issue 2, 2014, Pages 49-59]
-
Thermal wall conductivity
Numerical Study of Propane-Air Combustion Stability in a Diverging Microburner [Volume 7, Issue 2, 2014, Pages 17-30]
V
-
VOF
Design, Numerical Simulation and Experiment of a Swirl Injector with Tangential Inlets [Volume 7, Issue 2, 2014, Pages 97-110]
Your query does not match with any item